LG Nortel IPECS Dashboard

July 24th, 2016
Print Friendly, PDF & Email


LG ipecs Call Accounting

The LG iPECS can be configured to send its SMDR data over a serial (RS232) or an IP connection.

LG Nortel iPECS – Serial connection

The SMDR output in LG iPECS is disabled by default. To enable the output, you need to amend the following settings in the programming sections below:

SMDR Attributes (PGM 177)

FieldDescription
Print EnableThis needs to be enabled by clicking on the check box
SMDR Record Call TypeThis needs to be set to ‘All Calls’, you will need to select this from the drop-down list
Records In DetailThis needs to be enabled by clicking on the check box
Print Incoming CallThis needs to be enabled by clicking on the check box
Print Lost CallThis needs to be enabled by clicking on the check box
Print Caller NumberThis needs to be enabled by clicking on the check box



Here is an example of a populated SMDR Attributes screen:
LG Nortel Call Accounting

Printer Port Selection (PGM 175)
In the Printer Port Selection (PGM 175) window, set Info/On-line SMDR to COM1/COM2 to send call logging data by serial port.



ISDN Attributes (PGM 200)
To enable CLI information in the call records produced by your LG iPECS, you need to set the CLI Print To Serial to ON, as shown below:

LG Nortel Call Accounting



LG Nortel iPECS – IP connection

The SMDR output in LG iPECS is disabled by default. To enable the output, you need to amend the following settings in the programming sections below:

SMDR Attributes (PGM 177)

FieldDescription
Print EnableThis needs to be enabled by clicking on the check box
SMDR Record Call TypeThis needs to be set to ‘All Calls’, you will need to select this from the drop-down list
Records In DetailThis needs to be enabled by clicking on the check box
Print Incoming CallThis needs to be enabled by clicking on the check box
Print Lost CallThis needs to be enabled by clicking on the check box
Print Caller NumberThis needs to be enabled by clicking on the check box



Here is an example of a populated SMDR Attributes screen:
LG Nortel Call Accounting



Printer Port Selection (PGM 175)
In the Printer Port Selection (PGM 175) window, set Info/On-line SMDR to Telnet 1 to send call logging data to PBXDom collector over TCP to port 23.


ISDN Attributes (PGM 200)
To enable CLI information in the call records produced by your LG iPECS, you need to set the CLI Print To Serial to ON, as shown below:

LG Nortel Call Accounting

Reza Mousavi

Reza Mousavi

Serial Entrepreneur, Founder & CEO at PBXDom, Software Architect, Frequent reader, Fan of adventure travel
Reza Mousavi
Print Friendly, PDF & Email

Share this article on social networks:


Related Posts


Are you ready to start monitoring and analysis your phone systems?

Try PBXDOM for 14 days free
no credit card required.


Try free for 14 days 

Follow us

Follow us and get the latest news through your favorite Social Network