Mitel MiVoice Office

January 25th, 2016
Print Friendly, PDF & Email

Mitel 430 call accounting

Configuring the SMDR output by LAN

By default, the Mitel 5000-7000 has its SMDR output disabled. Follow the steps below to enable it:

1-Log in to the Mitel DB Studio software.
2-Click and expand the System node.
3-Click and expand the Cabinet node.
4-Select the Sockets node.
5-In the right-hand window, click on the SMDR parameter to set its enabled state to Yes.
6-Click and expand the System icon.
7-Click and expand the Maintenance icon.
8-Click on the SMDR icon.
9-On the right-hand side you will have the SMDR fields that need to be configured, as shown below:
Default port for TCP/Client connection is 4000.

Reza Mousavi

Reza Mousavi

Serial Entrepreneur, Founder & CEO at PBXDom, Software Architect, Frequent reader, Fan of adventure travel
Reza Mousavi
Print Friendly, PDF & Email

Share this article on social networks:

Related Posts

Are you ready to start monitoring and analysis your phone systems?

Try PBXDOM for 14 days free
no credit card required.

Try free for 14 days 

Follow us

Follow us and get the latest news through your favorite Social Network