Panasonic KX-TA308

September 14th, 2015
Print Friendly, PDF & Email



Panasonic KX-TA308 setup PBXDOM cloud call accounting service


Configuration collector software

baud rate     9600
data bits     8
parity     none
stop bits     1
flow control     hardware


PBX Settings

Go to the main console (Extension 101) and put it to programming mode by moving the switch on the phone to programming position.
Press *#xxxx where xxxx if the password for programming. This is usually 1234 or 0000 or 9999. If you don’t know the password then please contact the supplier.
[800] – RS-232C Communication Parameters: CR+LF, 9600, 8 bits, mark parity, 1 stop bit.
[801] – choose 0 (skip perforation)
[802] – incoming on and outgoing on
[803] – choose to print the speed dialing
[805] – choose account code report to be code or index.
[806] – choose English language reporting
move the programming switch to the original position

Reza Mousavi

Reza Mousavi

Serial Entrepreneur, Founder & CEO at PBXDom, Software Architect, Frequent reader, Fan of adventure travel
Reza Mousavi
Print Friendly, PDF & Email

Share this article on social networks:

Related Posts

Are you ready to start monitoring and analysis your phone systems?

Try PBXDOM for 14 days free
no credit card required.

Try free for 14 days 

Follow us

Follow us and get the latest news through your favorite Social Network