Samsung iDCS series

January 25th, 2016
Print Friendly, PDF & Email


Samsun IDCs call accounting
The Samsung iDCS can be configured to send its SMDR data over a serial (RS232) or an IP connection.

Configuring your SMDR output by Serial

Follow the instructions below to configure your Samsung iDCS to output SMDR data to PBXDom.
1-Log in to the Samsung Installation Tool software.
2-Click on the 5. Features option from the left-hand menu.
3-Click on the 5.6 System I/O Options tab and select 5.6.2. LAN Printer.
4-In the LAN Printer options configure the entries in the SMDR column, as shown below:
samsung_officeserv_1
5-Click on the Save icon to save the settings.
6-Click on the 5.6.3. SMDR Options tab and configure the following settings:
samsung_officeserv_2
7-Click on the Save icon at the top of the window to save the settings.


Configuring your SMDR output by LAN

Follow the instructions below to configure your Samsung iDCS phone system to output SMDR data to PBXDom.
1-Log in to the Samsung Installation Tool software.
2-Click on the 5. Features option from the left-hand menu.
3-Click on the 5.6 System I/O Options tab and select 5.6.2. LAN Printer.
4-In the LAN Printer options, configure the entries in the SMDR column, as shown below:
samsung_officeserv_1 (1)
5-Click on the Save icon to save the settings.
6-Click on the 5.6.3. SMDR Options tab and configure the following settings:
samsung_officeserv_2 (1)
7-Click on the Save icon at the top to save the settings.

Default port for LAN connection is 9000.

Reza Mousavi

Reza Mousavi

Serial Entrepreneur, Founder & CEO at PBXDom, Software Architect, Frequent reader, Fan of adventure travel
Reza Mousavi
Print Friendly, PDF & Email

Share this article on social networks:


Related Posts


Are you ready to start monitoring and analysis your phone systems?

Try PBXDOM for 14 days free
no credit card required.


Try free for 14 days 

Follow us

Follow us and get the latest news through your favorite Social Network